interior texture of the lamp imprinted by an aluminium mold
exterior texture of the lamp
inside texture of melted clay | unsuccessful experiment with a plaster mold
unsuccessful experiment with a sand mold
BOILED CLAY LAMP
While experimenting with clay, I accidentally fired it at a higher temperature than needed, causing it to melt and expand as trapped air bubbles grew within the material. The result was a lightweight, porous material with an unusual texture. Intrigued by its properties, I began exploring its potential for product design.
I chose to develop a suspended lampshade, as light would emphasise the intriguing texture, while its low weight makes it suitable for suspension.
Developing a way to shape the material proved challenging. I experimented with different mold materials, as the melted clay would stick to their surfaces. Eventually, I found a solution using aluminium foil, which transformed during firing and allowed the clay to separate easily from the mold. By distributing clay over the top of the mold, I allowed the materil to melt and flow down its sides, forming the lampshade. Several trials were needed to determine the right amount and placement of clay to achieve desired shape.
This project also became a starting point for further exploration of textures and forms created by bringing together materials and processes that do not normally interact.